lsblk
sdc 8:32 1 7.4G 0 disk
└─sdc1 8:33 1 7.4G 0 part
sudo fdisk /dev/sdc
Welcome to fdisk (util-linux 2.27.1).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Command (m for help): o
Created a new DOS disklabel with disk identifier 0x96e5850d.
Command (m for help): n
Partition type
p primary (0 primary, 0 extended, 4 free)
e extended (container for logical partitions)
Select (default p):
Using default response p.
Partition number (1-4, default 1):
First sector (2048-31291391, default 2048):
Last sector, +sectors or +size{K,M,G,T,P} (2048-31291391, default 31291391):
Created a new partition 1 of type 'Linux' and of size 14,9 GiB.
Command (m for help): w
The partition table has been altered.
Calling ioctl() to re-read partition table. Syncing disks. |
- Initialize the ext3 partition using “mke2fs”, for example if the microSD card is associated with sdc:
sudo mke2fs -t ext3 /dev/sdc1
mke2fs 1.42.13 (17-May-2015)
Creating filesystem with 3911168 4k blocks and 979200 inodes
Filesystem UUID: 690804b9-6c7d-4bbb-b1c1-e9357efabc52
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208
Allocating group tables: done
Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done - Mount the microSD card partition, for example example if the microSD card is associated with sdc:
mkdir /tmp/agl sudo mount /dev/sdc1 /tmp/agl/
sudo tar --extract --numeric-owner --preserve-permissions --preserve-order --totals \
--xattrs-include='*' --directory=/tmp/agl --file=agl-demo-platform-porter.tar.bz2Weston
If Weston fails to start double check /etc/xdg/weston/weston.ini and verify that the output name and screen resolution matches the configured U-Boot environment, for example on Renesas Porter board rev 1.0 with screen resolution 1024×768:
[core] shell=desktop-shell.so backend=drm-backend.so [shell] locking=true # Uncomment below to hide panel #panel-location=none [output] name=HDMI-A-1 mode=1024x768 #mode=1920x1080 #mode=173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync